Let us help you find product family that best suites your needs. Select the features you need, and we'll give you a recommendation:

FC-40 Plus Series
Rodix FC-40 Plus Series Controls are used to operate bowls, storage hoppers and inline linear feeders. This control family is typically used on loads which run continuously, or are demand cycled by a PLC machine control or parts sensor with built-in time delays and power supply. 120VAC models are available in 15 and 30 AMP packages; 240VAC models are available in 8 and 15 Amp packages.

FC-40-PLC Plus Series
The FC-40-PLC Plus Series is an advanced version of the original FC-40 Plus Series. It contains many of the same features as the FC-40 Plus Series such as UL approval, soft start, and a maximum output adjustment. The major advantage of the new FC-40-PLC Plus Series is the line voltage compensation feature that helps to adjust for fluctuations in the power line. The '-PLC' name signifies the ease of integrating these controls to a Programmable Logic Control for remote control capabilities such as 4-20mA amplitude control, 0-5VDC amplitude control, as well as the standard 24VDC ON/OFF control.

FC-70 Series
Rodix FC-70 Series Controls are used to operate small vibratory bowls, storage hoppers and inline linear feeders. This control family is typically used on loads that run continuously, but can be demand cycled by a PLC machine control or parts sensor which has its own built-in time delays and power supply.

FC-90 Plus Series
Rodix FC-90 Plus Series Controls are used to operate vibratory bowls with part sensing, and storage hoppers fitted with electronic bowl level detectors. The 12VDC power supply and sensor time delays are provided by the control. The demand cycling of the bowl or hopper is controlled by the sensor's output signal processed through the time delay settings inside the FC-90.

FC-200 Series
The Rodix FC-200 Plus Series Feeder Cube is a completely digital control based on the same proven durability as the FC-90 Plus Series.  All of the set up adjustments are done through the keypad on the front cover. With an easy to read LCD display, you can precisely adjust the feed rate and know the status of the sensor and auxiliary output.  UL and cUL approved.  CE marked units available.

FC-90-PLC Plus Series
The Rodix FC-90-PLC Plus Series controls are dual and triple units that combine a 90 Plus Series controller and a 40-PLC Plus Series controller in the same enclosure. The FC-90 Plus side can be used to operate vibratory bowls with part sensing, and storage hoppers fitted with electronic bowl level detectors. The 12VDC power supply and sensor time delays are provided by the control. The demand cycling of the bowl or hopper is controlled by the sensor's output signal processed through the time delay settings inside the FC-90 Plus. It is combined with the FC-40-PLC Plus Series which is an advanced version of the original FC-40 Plus Series. It contains many of the same features as the FC-40 Plus Series such as UL approval, soft start, and a maximum output adjustment. The major advantage of the FC-40-PLC Plus Series is the line voltage compensation feature that helps to adjust for fluctuations in the power line. The '-PLC' name signifies the ease of integrating these controls to a Programmable Logic Control for remote control capabilities such as 4-20mA amplitude control, 0-5VDC amplitude control, as well as the standard 24VDC ON/OFF control.

CFR-90 Plus Series
The CFR-90 Plus Series Feeder Cubes^® are primarily used on vibratory bowls where the output of the feeder can fluctuate based on the amount of parts in the bowl. The CFR-90 Plus Series detects changes in the vibration level and automatically increases or decreases the speed of the bowl based on the feedback from the vibration sensor mounted on the vibratory bowl.

Autotune® Series
The Autotune Series of Rodix variable frequency feeder controls are ideal for vibratory bowls, storage hoppers and linear inline feeders. In addition to controlling the amplitude, the Autotune Series will also vary the frequency allowing the feeder to operate at its resonant frequency. A feeder operating at its resonant frequency will perform more efficiently, last longer, save on maintenance costs and consume less power. We offer the Autotune Series controllers in four sizes; the VF-3 (3 amp), VF-9 (9 amp), VF-12 (12 amp) and VF-18 (18 amp). Dual and triple units are also available.

CE-40 Plus Series
The Rodix Inc CE-40 Plus Series vibratory feeder controllers are designated with the CE mark for exporting to Europe. Features include line voltage compensation, soft start, maximum output adjustment, 4-20 mA and 0-5 vdc remote speed control. They are available as open frame style controllers for installing in larger control cabinets or as stand-alone controllers in Nema-12 oil resistant enclosures. Available in 120VAC and 240VAC, they can be built as single, dual or triple units. A Declaration of Incorporation is provided.

CE-90 Plus Series
The Rodix Inc CE-90 Plus Series vibratory feeder controllers are designated with the CE mark for exporting to Europe. Features include an output for interfacing with a parts sensor, on and off delay adjustments, soft start, maximum output adjustment and the ability to operate a CFR vibration sensor. They are available as open frame style controllers for installing in larger control cabinets or as stand-alone controllers in Nema-12 oil resistant enclosures. Available in 120VAC and 240VAC, they can be built as single, dual or triple units. A Declaration of Incorporation is provided.