The CE-103 Plus is a triple controller in a Nema-12 oil resistant enclosure that carries the CE mark. Unit A (4 amps) and Unit C (1 amp) are 40 Plus Series controllers. Unit B (15 amps) is a 90 Plus Series controller with parts sensing. Input voltage is 120VAC, 50/60 Hz. Declaration of Incorporation provided.
CE-90 Plus Series "Parts Sensing" Feeder Cube® Controllers
CE-90 Plus Series Typical Applications
Vibratory bowls that require part sensing
Storage hoppers using photoelectric bowl level detectors
Electrical Specifications
120VAC input voltage, 50/60 Hz, 15 amps or 30 amps
240VAC input voltage, 50/60 Hz, 8 amps or 15 amps
Enclosure Styles
Nema-12 oil resistant (single, double and triple units)
UL and cUL listed (File EI83233)
Provides a soft-start adjustment so a feeder bowl, inline track drive or storage hopper can cycle on gently.
Maximum output power level adjustment allows for the maximum output of the control to be preset.
Output is switch selectable from 120 pulses per second (UN-rectified or full-wave) to 60 pulses per second (rectified or half-wave).
Line voltage compensation feature automatically adjusts the output of the controller to compensate for incoming voltage fluctuations.
12vdc power supply provided along with separate on and off time delays for the parts sensor (NPN or PNP).
Auxiliary output provided for interlocking with other Rodix controls
A Constant Feed Rate (CFR) sensor can be installed to automatically adjust the output of the control based on the vibration level of the feeder.
Line filter installed to minimize the effects of electrical noise.
